Dining Chair

Solid Wood Dining Chairs Sheesham, Cane & Upholstered Designs

Dining chairs are the most physically tested furniture in any home. They get pulled out and pushed back dozens of times a day. They carry adult weight at odd angles — someone leaning back, someone sitting sideways, a child standing on the seat. The joints flex and reload with every movement. A chair built from solid sheesham with properly cut mortise-and-tenon joinery handles this for twenty years. A chair built from MDF with dowel joints starts loosening within two or three years of that same daily use.

When buying the best dining table and chair combination, the chair is often the harder decision it has to be comfortable, durable, and right for the room simultaneously. At Craftkala, every wood dining chair we make is built from solid sheesham at our Gurugram workshop — no engineered frames, no hollow legs, no laminated seats. Our dining chair range has 12 models across two design families: sheesham-framed upholstered chairs and sheesham-framed cane chairs. All are ISO and BIFMA certified, available in walnut finish, and designed to pair directly with our wooden dining table designs.

Sheesham Upholstered Dining Chairs The Core Range

Our Sheesham Wood Dining Chair range starts with three foundational models Bayline, Vieana, and Olvie each built to a specific use case rather than a generic “dining chair” brief.

The Bayline is our most structured dining chair a straight back, a firm upholstered seat, and a profile that suits formal dining. The back angle is 95 degrees from the seat close to upright, which keeps posture correct during a meal and makes getting up from the chair effortless. Available in walnut finish with upholstery in beige, grey, and blue. If your dining room is used primarily for meals rather than extended work or study, the Bayline is the right starting point.

The Vieana has a slightly softer back angle 100 degrees which makes a noticeable difference over a long dinner or a work-from-home afternoon at the dining table. Same sheesham construction, same upholstery options (walnut, grey, blue), but the recline takes the pressure off the lower back during extended sitting. For households where the dining table doubles as a work or study surface, the Vieana is the more comfortable daily choice.

The Olvie is our most minimal design no upholstery, solid sheesham seat, clean lines with a slight taper on the back legs. It suits contemporary dining rooms where fabric at the dining table feels too formal, or homes with young children where upholstered seats require constant cleaning. The all-wood surface wipes down in seconds and ages well sheesham darkens slightly over years of use in a way that looks intentional rather than worn.

Beyond these three, our extended range adds the CrownWood, Veyra, Luma Comfort, Aristova, and Alvera Signature each with slightly different headrest profiles and upholstery configurations for buyers who want a more distinctive silhouette at the wooden table and chairs dining room setup.

Cane Dining Chairs Natural Texture, Sheesham Frame

Cane seating has been in Indian homes for generations not as a budget alternative to upholstery, but as a deliberately chosen material that breathes, ages well, and introduces a natural texture that fabric can’t replicate. Our cane dining chairs combine sheesham frames with hand-woven cane backs and seats the structural strength of solid hardwood with the visual lightness of natural weave.

The Arco Cane Dining Chair is our most straightforward cane design a clean sheesham frame with a full cane back and seat, suited to dining rooms that use natural materials throughout. The Elara Cane has a taller, more architectural back better for rooms with high ceilings where a low-backed chair looks underpowered against the space. The Le Cane Royale has the most refined profile a curved cane back with a upholstered seat pad for buyers who want the visual character of cane with a softer sitting surface. The Linea Cane is our most contemporary interpretation a straight-lined frame with a geometric cane weave pattern that suits modern interiors without the traditional associations of the classic rounded cane design.

Cane chairs pair particularly well with our sheesham dining tables the Sheesham Spin Rounded Dining Table and Loyace Sheesham Wood Dining Table in particular, where the natural grain of the sheesham frame reads consistently with the table surface. These suit all dining room table designs and for buyers putting together a complete wood chairs for dining room table arrangement, ordering the cane chairs in the same walnut finish as the table creates a room that feels curated rather than assembled from separate purchases.

How Many Chairs Getting the Set Right

A dining chairs set of 4 suits a 4-seater or small 6-seater table where two of the six positions are used less frequently. For a true 6-seater arrangement used at full capacity regularly Sunday lunches, family gatherings order 6 chairs. Our dining chairs are sold individually and in sets, so you can start with 4 and add 2 later in the same model if your needs change.

For a 6-seater table, the proportion rule is: two chairs on each long side, one at each head. This works for rectangular tables like the dining table 6 seater wooden Woodera Rectangle. For a round or oval table, six chairs arranged evenly around the perimeter no head position creates a more democratic seating arrangement where no single seat is the “host” position. Our Sheesham Spin Rounded Dining Set is designed specifically for this configuration.

Chair spacing matters more than most buyers anticipate. Each person at a dining table needs roughly 60cm of table edge width to sit comfortably without shoulder contact with the person next to them. On a standard 6-seater table (180cm long), four chairs on the long sides at 60cm spacing leaves 60cm for the two end chairs which works correctly. Crowding in a 5th chair on a long side pushes everyone to 48cm, which is noticeably tight.

Upholstery Colours Matching Your Dining Room

All upholstered chairs in our range come in three fabric options: beige, grey, and blue. Each suits a different dining room colour palette.

Pair any of our chairs with a dining room table solid wood surface in sheesham or mango and the room holds a consistent material story throughout. Beige works with warm-toned walls cream, terracotta, warm white and with natural-finish or walnut-finish tables. It’s the most forgiving colour in terms of what it sits against. Grey is the most versatile in contemporary interiors it reads as neutral without the warmth of beige, and it suits cooler wall tones and marble or stone dining room flooring. Blue is the most directional choice it introduces colour into a room that might otherwise be dominated by the warm tones of the sheesham wood, and it works particularly well in dining rooms with white or light grey walls.

For a dining room side table or wooden sideboard in the same room, keep the wood finish consistent with the chair frames. Our sideboards are available in the same walnut sheesham finish as the dining chairs ordering from the same finish family means the room holds together without requiring a designer to coordinate it. For modern tables for dining room setups, our cane chairs and the Olvie solid-seat design are the strongest pairings.

Dining Chair Care Solid Wood vs Engineered

Solid sheesham dining chairs need minimal maintenance. Dust with a dry cloth. Re-oil the wood once a year with Danish oil or teak oil to maintain the finish particularly important in dry winter months in Delhi NCR when indoor humidity drops and wood can dry out. Avoid placing dining chairs in direct sunlight for extended periods, which fades upholstery and can bleach the wood finish unevenly.

Upholstery care is straightforward for the fabric options we use blot spills immediately with a dry cloth, avoid scrubbing which spreads the stain, and use a mild upholstery cleaner for stubborn marks. The sheesham frame around the upholstered seat can be wiped with a damp cloth without affecting the wood finish. According to World Fair Trade Organization furniture care guidelines, solid hardwood furniture maintained with annual oiling retains its structural integrity and surface appearance significantly longer than engineered wood alternatives under equivalent daily use conditions.

Frequently Asked Questions About Dining Chairs

What is the standard dining chair height in India?
Standard dining chair seat height is 45–47cm from the floor. This pairs correctly with a standard dining table at 75–76cm height, giving you 28–31cm of clearance between the seat and the underside of the table the ergonomically correct range for comfortable sitting without cramping the legs.

How many chairs do I need for a 6-seater dining table?
Six chairs for a full 6-seater arrangement. For occasional use of the full capacity, 4 chairs stored regularly and 2 additional chairs brought out for guests is a practical approach all our models are sold individually so you can match additions to existing purchases.

Which dining chair is best for long sitting Bayline or Vieana?
The Vieana is the better choice for extended sitting. Its 100-degree back angle takes pressure off the lower lumbar compared to the Bayline’s more upright 95-degree profile. For purely meal-time use, the Bayline’s upright posture aids digestion and ease of getting up from the table.

Can I mix cane and upholstered dining chairs at the same table?
Yes a common approach is upholstered chairs on the long sides of the table and cane chairs at the head positions, or vice versa. Keep the sheesham frame finish consistent across all chairs (all walnut) and the mix reads as deliberate rather than mismatched.

Where can I see the dining chairs in person?
Our showroom is at Khasra No. 297/5, Gadoli Kalan, Sector 37D, Gurugram open Monday to Saturday, 10am to 6pm. We have our full dining chair range on the floor alongside our dining tables so you can check the height pairing and upholstery colours in person. Pan-India delivery with EMI available. Contact us at hello@craftkala.com or +91-9810077793.